Notice IOMEGA ScreenPlay HD 1 To disponible gratuitement après inscription

Extrait de la notice

press MENU repeatedly until the screen displays normally. This toggles the video ouput setting on the ScreenPlay TV Link as follows: 1080i ? 720p ? SD Progressive ? SD Interlace ? NTSC ? PAL. ScreenPlay TV Link does not recognize a connected USB device • Check all connections. • If you are using a hard drive or REV USB drive, make sure it is receiving power. • If you are using a hard drive or flash drive, make sure it is formatted NTFS or FAT32. Drives that are formatted specifically for Mac OS (HFS+) will need to be reformatted to work with the ScreenPlay TV Link. If you are not sure what format your drive is using, refer to the HTML user’s manual available from the support area on www.iomega.com. CAUTION! Formatting the drive will erase all existing data! If you have files on the drive you want to save, move them to another drive before reformatting.5 ScreenPlay TV Link does not respond to the remote control • Make sure you are pointing the remote control directly at the front of the ScreenPlay TV Link. • Make sure the ScreenPlay TV Link is receiving power. • Activate the ScreenPlay TV Link by pressing the STANDBY button on the remote control (blue light will flash, then glow steadily). • If you are using the remote control for the first time, pull out the tab on the side of the remote to enable battery power. • Check the orientation of the battery in the remote control. The “+” side of the battery should be up. For additional troubleshooting help, visit the support area on www.iomega.com. Complete User’s Manual A complete user’s manual in HTML format is available on the support area on www.iomega.com. Connexion du ScreenPlay TV Link ÉTAPE 1 : Connectez le ScreenPlay TV Link à votre téléviseur. Ces instructions utilis...