Notice JAMO S 502 HCS 51 disponible gratuitement après inscription

Extrait de la notice

mme information on the S DVR 52 display by pressing DISPLAY on the remote. Selecting preset programs To select preset programs, press PRESET -or PRESET + on the remote. Automatically find and store a radio station 1. Press and hold PROGRAM for more than 5 seconds, all radio stations with strong signal strength will be stored automatically 2. The system will stop when all the available stations are stored or the memory of 40 preset radio stations is full. Stereo and mono reception If the signal from the FM stereo station is weak, you can improve the sound qual- ity by switching to mono reception. To do this, press the MONO/STEREO button on the remote. REMOTECONTROLLER20 Troubleshooting If the S DVR 52 appears to be faulty, first consult this troubleshooting guide before calling for service. Refer also to the corresponding instructions in this manual. WARNING Under no circumstances should you attempt to repair the system yourself. SymptomPossible causeCorrection No picture.• The TV is switched OFF. • The TV is not connected correctly. • Turn ON the TV. • Connect the TV correctly. Disc can’t be played.• The disc is placed upside down. • The disc is empty or the format is not supported by S DVR 52. • The disc is dirty or defect. • The disc is not placed within the disc tray guide. • Ensure the disc label is facing up. • Remove the disc and try another. • Clean the disc or dispose of it. • Place the disk within the proper guide on the disc tray. No sound.• The VOLUME is set to 0. • Speaker cords are not connected correctly. • Turn up the VOLUME. • Connect them correctly. The S DVR 52 unit does not respond to commands from the remote control. • No batteries are inserted in the remote control. • The...