Notice KENWOOD ES460 disponible gratuitement après inscription

Extrait de la notice

ray ?Empty the drip tray regularly. You’ll know when it is full, the red float in the middle of the drip tray will rise and become visible in the centre hole on the cup stand. 1Wash then dry.liquid coffee outlet/boiler unit ?Wipe away any coffee grounds from this area. At least twice a year carry out the following procedure:- 1Using a screwdriver , unscrew the screw that holds the outlet of the boiler in place. 2Clean the boiler area with a damp cloth. 3Clean the removed outlet thoroughly in hot soapy water using a brush. Rinse thoroughly. Make sure the holes are not blocked, if necessary use a pin to clean. 4Reverse the above procedure to re fit to the outlet. Failure to clean the boiler outlet and the filters as described invalidates the guarantee. descaling It is advisable to discale the coffee maker after 200 cups of coffee have been made. 1We recommend purchasing a specific product for descaling espresso coffee machines. 2Make sure the filter holder is not attached and position a bowl under the liquid coffee/boiler outlet. 3Pour 1 litre water and 250ml descaler into the tank. 4Turn the selector knob to the boiler position () and wait until the OK light glows. 5Turn the selector knob to the coffee position () and allow half the solution to flow out. Turn the selector knob back to the off () position to stop the flow. 6Leave the machine to stand for 15 minutes, then turn the knob to the coffee position () and allow the tank to completely empty. 7Thoroughly rinse the tank. Fill with fresh water and turn the selector knob to the coffee position () and allow all the water to flush through. 8Turn the selector knob to the off () position. Repairs caused by malfunctioning due to a build up of limescale in the product are not covered by th...