Notice KLIPSCH RW-10d disponible gratuitement après inscription

Extrait de la notice

hese two modes.When “Auto On”is selected,the subwoofer will automatically turn on when it senses a signal.It will automatically turn off after 20 minutes if no signal is present and “Standby”will be displayed.In the “Always On”setting the subwoofer will remain on as long as the main A/C power switch on the subwoofer’s rear panel is in the “ON”position.From this screen press the down or up cursor key to access other control settings. “Keypad Lock”- This screen is used to lock the keypad and prevent your settings from being changed by other users.After making all desired adjustments press the Center key to lock the keypad.“Keypad Locked Hold and to unlock”will be displayed.The display will then return to the default “Volume” screen.To unlock the keypad press and hold the Left and Right keys until “Keypad Unlocked”is displayed.The display will again return to the default “Volume”screen.It is suggested that you write down all of your settings for future reference in case the keypad is unlocked and your settings are changed by another user. For more information on the controls mentioned in this manual and on the bass management settings of your electronics,see your authorized Klipsch dealer or visit www.klipsch.com. BACKPANELFEATURES “POWER”ON/OFF- This is the main A/C power switch for the subwoofer.This switch must be in the “ON”position for the sub- woofer to operate and for the “AUTO/ON”feature to function.Set this switch to the “OFF”position if the subwoofer will not be used for an extended period of time (i.e.vacation). IR SENSOR- An infrared remote control sensor is included on the rear panel of your subwoofer for integration with A/V remote control systems.The IR codes for this subwoofer can be obtained by visiting www.kli...