Notice LAVAZZA EP 2100 disponible gratuitement après inscription

Extrait de la notice

er or when the machine doesn’t work properly. Arrange for repairing the machine before using it again. Repairs must ONLY be performed by qualified personnel/engineers. Do not expose the machine to weather conditions and do not immerse in water.12 Power the machine by connecting its lead with the electricaloutlet (Figure 4). Move the switch on the back of the machine to position “I” (Figure 5). Fig. 4Fig. 5
CAUTION Remember to connect, first, the feeder to the machine, then the feeder must be placed into the wall socket, then you turn it on. To move the machine, you have to turn the switch to the position “0”, after you have to disconnect the wall socket and finally you have to separate the feeder from the machine. INSTALLATION Position the machine on a flat, horizontal surface. Remove the access lid on the right of the tank using the key supplied (Figure 1); release the central lid (Figure 2), remove the tank (Figure 3) and fill it with drinking water (preferably with a low lime content). Fig. 1Fig. 2Fig. 3 GB13 The following LEDs will light up on the front panel (Figure 6): Flashing red “On”. Signals that the machine is switched on. Flashing orange “Temperature Control LED”. It shows that the electronic thermo- stat is switched on. The LED is flashing when the boiler hasn’t reached the right temperature; on the contrary it is always on when the boiler has reached the right temperature. The alternation between intermittent and fixity phases can be irregu- lar as the electronics of the machine works in a dynamic way on the control of the temperature. Flashing green “Water supply level LED”. It shows the level supply of water in the tank. The LED will flash if the level of the water in the tank is too low. Fig. 6 GB ARRANGEMENT OF LIM...