Notice LVI Muria disponible gratuitement après inscription

Extrait de la notice

ustment can be made with the screw inside the bracket, as shown in fig. 3A. towelwarMer wIth connectIon cable and Plug Connect the towel warmer’s connection cable to an earthed wall socket with the plug. towelwarMer wIth connectIon cable wIthout a Plug Connect the towel warmer’s 3-core cable to a suitable terminal box as follows: Brown wire = Live Blue wire = Neutral Green/yellow wire = Earth The electrical installation must be done by an authorised electrician. Model nIla/nIla r/nIla tI wIth concealed connectIon The Nila/Nila R/Nila Ti model can be installed with concealed connection as an alternative (not the Muria/Muria R/Muria Ti model). The centre of the wall out- let for the connecting wires can be seen in fig. 7. The supplied backing washer can be used here. The connection box must be modified for installation with concealed connec- tion. Start by removing the lid of the connection box by undoing the two screws which hold the lid in place. Then disconnect the installed connection cable. Remove wires A on the heating element and release the insert. Remove nut C completely, using the supplied 21 mm hexagon socket, and rotate the under ENGLISH part of the terminal box so that bushing D faces the wall, see fig. 8 for Nila and 9 for Nila R/Nila Ti, and then tighten nut C securely. The electrical installation must be done by an authorised electrician. InstallatIon wIth concealed connectIon wIthout backIng washer Position the connection box so that the hole in bushing D centres the connection cable, and then mark the screw holes on the wall brackets. Install the towel- warmer. InstallatIon wIth concealed connectIon wIth backIng washer Centre the backing washer over the connection cable. If necess ary, secure it to the wall wi...