Notice MAKITA BDF442RFE disponible gratuitement après inscription

Extrait de la notice

ve two screws then remove the rear cover. (Fig.12) Nominal diameter of wood screw (mm) Recommended size of pilot hole (mm) 3.12.0 - 2.2 3.5 2.2 - 2.5 3.82.5 - 2.8 4.52.9 - 3.2 4.83.1 - 3.4 5.1 3.3 - 3.6 5.5 3.7 - 3.9 5.84.0 - 4.2 6.14.2 - 4.47 Raise the arm part of the spring and then place it in the recessed part of the housing with a slotted bit screwdriver of slender shaft or the like. (Fig.13) Use pliers to remove the carbon brush caps of the carbon brushes. Take out the worn carbon brushes, insert the new ones and replace the carbon brush caps in reverse. (Fig.14) Make sure that the carbon brush caps have fit into the holes in brush holders securely. (Fig.15) Reinstall the rear cover and tighten two screws securely. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: •These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. •Drill bits •Screw bits •Bit holder •Hook •Various type of Makita genuine batteries and chargers •Automatic refreshing adapter •Plastic carrying case For Model BDF442 For European countries only NoiseENG104-1 The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA): 71 dB (A) Uncertainty (K): 3 dB (A) The noise level under working may exceed 80 dB (A). Wear ear protection. VibrationEN...