Notice MARMITEK XM10 disponible gratuitement après inscription

Extrait de la notice

of each X-10 transmission. This output is the envelope of the bursts of 120 kHz received. Only the envelope corresponding to the first burst of each group of 3 bursts is available at the output of the two-way interface. See Figures 3, 4 and 5. Start Code House Code Function Code Start Code House Code Function Code Start Code House Code Function Code Figure 3: X-10 code received from the AC power line - 6 - X-10 protocol for the Marmitek XM10 OEM Controller Received Timing Diagrams Figure 4 figure 5 - 7 - X-10 protocol for the Marmitek XM10 OEM Controller Typical Controller Connection Diagram Connection between the controller is via a standard modular phone jack, the connections for which are as follows: 1. B Zero crossing detect output (with respect to 2). 2. R Common. 3. G X-10 received envelope output (with respect to 2). 4. Y X-10 transmit envelope input (with respect to 2). - 8 - X-10 protocol for the Marmitek XM10 OEM Controller Technical data Supply voltage: 230V +10% -15% 50 Hz Ambient temperature: - 10° C to + 40° C (operation) - 20° C to + 70° C (storage) DC characteristics: Serial data input: Min. logic «1»: 4 V input will sink approx 2,5 mA Max. logic «1»: 20 V input will sink approx 18 mA Max. logic «0»: 0.8 V will sink approx 0,1 mA (Voltages and currents with respect to terminal 2) Note: this output is an open collector transistor. Therefore, the logic «1» voltage is quoted as a reference for defining the output leakage current. An output pullup resistor is required to generate a logic level. The pullup can be returned to any voltage up to 20 V with respect to terminal 2. AC characteristics: HF output to AC power line: 60 mW average into 5W Conforms to Cl...