Notice MITSUBISHI MSCGA35VB disponible gratuitement après inscription

Extrait de la notice

received by the indoor unit. Use the remote controller provided with the unit only. Do not use other remote controllers. Outdoor unit Installing the remote controller batteries Setting current time NAME OF EACH PARTPREPARATION BEFORE OPERATION 1. Press CLOCK 3. Press CLOCK again 2. Press the TIME set buttons to set the time Each time / is pressed, the set time increases by 1 hour/minute. Indoor unit Remote controller Outdoor units may be different in appearance. • Make sure the polarity of the batteries is correct. • Do not use manganese batteries. The remote controller could malfunction. • Do not use rechargeable batteries. • Replace all batteries with new ones of the same type. • Batteries can be used for approximately 1 year. However, batteries with expired shelf lives last shorter. • Press RESET gently using a thin instrument. If the RESET button is not pressed, the remote controller may not operate correctly. 1. Remove the front lid 2. Insert AAA alkaline batteries 3. Install the front lid 4. Press RESET • Press CLOCK gently using a thin instrument. Air inlet (back and side) Piping Drainage hose Air outlet Drain outlet COOL & HEAT type COOL ONLY type Display section Remote control receiving section Operation Indicator lampHorizontal vane Vertical vane Air outlet Air inletHeat exchanger Front panel Air cleaning ? lter (Option) Emergency operation switch Page 4 Fan Air ? lter (Catechin air ? lter with deodorizer) How to set the type This remote controller setting needs to be switched according to the type of air conditioner (COOL & HEAT or COOL ONLY). Slide switch Position of the slide switch <COOL & HEAT type><COOL ONLY type> • Incorrect setting causes a malfunction. Check the...