Notice MITSUBISHI MSZGC22VA disponible gratuitement après inscription

Extrait de la notice

About 6 m Beep(s) is (are) heard from the indoor unit when the signal is received. Operation display section ON/OFF (operate/stop) button Temperature buttons Page 4 Operation select button Page 4 ECONO COOL button Page 5 FAN speed control button Page 5 Off-timer button Page 5 On-timer button Page 5 VANE control button Page 5 TIME set buttons Pages 3, 5 Increase time Decrease time CLOCK button Page 3 RESET button Page 3 Lid Slide down to open • Install the remote control- ler holder to a place where the signal can be received by the indoor unit. Use the remote controller provided with the unit only. Do not use other remote controllers. Horizontal vane Vertical vane Air outlet Fan Air ? lter (Catechin air ? lter) Air inlet Heat exchanger Front panel Air cleaning ? lter (Anti-Allergy Enzyme Filter, option) Fan guard Outdoor unit Installing the remote controller batteriesSetting current time NAME OF EACH PART PREPARATION BEFORE OPERATION 1. Remove the front lid 2. Insert AAA alkaline batteries 3. Install the front lid 4. Press RESET 1. Press CLOCK 3. Press CLOCK again 2. Press the TIME buttons to set the time Each press increases/decreases the time by 1 minute (10 minutes when pressed longer) Indoor unitRemote controller Appearance of the outdoor unit may differ from some models. SG79F225H02_En.indd 32008/04/10 13:45:49En-4 AUTO mode (Auto changeover) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL?HEAT) when the room temperature is 2°C away from the set temperature for more than 15 minutes. Note: During multi system operation, the un...