ound level on the subwoofer and compensate by turning up the subwoofer sound level on the AV amplifier. B C D E F A TECHNICAL INFORMATION • 1 active 8”/10?/12?/15? woofer(1) with very long throw coil, 7? double magnet and 2.5?/3.0?/3.0? coil. • 1 passive(2) 8”/10?/12?/15? woofer with very long throw and additional mass. • 2 line input • 2 line output • 2 speaker input • Electronic limiter (3) • Phase adjustment 0° or 180° • Active crossover with variable cut off and 24dB/Oct slope (4). • 19 to 25mm’ MDF cabinet TITAN 5.4 TITAN 7.4 TITAN 11.4 TITAN 15.4 Dimension 25 x 30 x 25 cm 32 x 36 x 32 cm36 x 40 x 36 cm 42 x 46 x 42 cm Weight 16 Kg 20 Kg 25 Kg 30 Kg Frequency range 30 to 200 Hz 26 to 180 Hz 20 to 140 Hz 16 to 100 Hz Power 200/400 W 200/400 W 200/400 W 200/400 W 1 Driver with a diaphragm moved by an electromagnetic motor. The movement is proportional to the electric signal generated by the amplifier. 2 Driver with a diaphragm coupled with an additional mass but without motor. The movement is created by the acoustic coupling of the passive and active drivers. 3 Device allowing a progressive limitation of the amplifier’s maximum level of output power to avoid any acoustic saturation. 4 The cut off slope of a crossover shows the level of attenuation of the frequencies located beyond cut off. 24dB per octave means that if the cut off frequency is 80Hz, the 160Hz frequency will have an attenuation of 24dB....