Notice NAD C160 disponible gratuitement après inscription

Extrait de la notice

D-Link connectors can be daisy-chained, IN to OUT, so that a whole system can be controlled from the remote control facilities of one unit. 15. 12V TRIGGER OUT The 12V trigger is activated automatically when switching the NAD C160 from off or stand-by to on. Connect the 12V trigger to a power amplifier or AC outlet power strip equipped with a 12V trigger input for remote on/off switching of those devices. Use a cable terminated with a 3.5mm Mini-Jack connector at the pre- amplifier’s end for connection. 16. AC LINE CORD Plug the AC power cord into a live AC wall socket. Make sure all connections have been made before connecting to mains. 17. SWITCHED AND UNSWITCHED POWER OUTLETS (AH VERSION ONLY) The AC power cords of other stereo components, such as a CD player, may be plugged into these accessory outlets. Components plugged into the outlet marked “switched” will be switched on and off as the pre-amplifier is switched from stand-by or off to on and vice versa. Mains power is always available on the outlet marked “unswitched” as long as the NAD C160’s power cord is plugged into a live AC wall outlet. This outlet can be used for components which may require continuous supply of AC mains; some tuners require uninterrupted mains supply to retain preset memory, for instance. NOTE: The total power consumption of any components connected to the AC outlets may not exceed 100 Watts. Never connect the mains lead of a power amplifier to either the Switched or Unswitched outlets of the NAD C160. QUICK START 1. Connect a twin RCA lead to a power amplifier. 2. Connect the desired sources to the relevant input sockets on the rear. 3. Connect speakers to the power amplifier. 4. Plug in the AC power cord. 5. Press the POWER button to turn on the...