the safety belt when the child is lying down and sitting up. _ Do not use this product for your child until he or she is able to sit upright alone. _ Tray and accessory trays are not designed to support the child’s weight; tray is not designed to hold the child in the chair. _ Always use the highchair on a flat, horizontal surface. _ Be careful of where you place the product. Avoid placing the child near safety hazards such as electrical cords, sources of heat, or flames. _ Do not put fingers in the mechanism. Make sure your child’s arms and legs are clear of the moving parts during adjustment. _ Using accessories that have not been approved by the manufacturer may be hazardous. _ Do not use the product near stairs or steps. _ Be careful not to place the product near sources of heat or flames, such as gas stoves, electric heaters, etc. INSTRUCTIONS 1 FITTING THE REAR WHEELS AND FRONT FEET: before inserting the wheels, fit the wheel locks as shown in the figure (fig_a). Fit the two wheels at the back of the high chair (fig_b) and the two feet at the front (fig_c), pushing in the direction of the arrow. 2 OPENING: when it is removed from the packaging, the high chair is not in the correct position for use (packing position). For use, raise it up until it engages with a click at one of the seven chair heights (fig_a). To open the high chair, push the red side levers down (fig_b) and push the back supports outwards. 3 Before using the high chair, remove the spacers (fig_a) and lower the footrest (fig_b). 4 TRAY: to fit the tray, pull the lever underneath it towards you (fig_a) while at the same time inserting it onto the armrests, and push down fully (fig_b). The tray is extendible to three positions (fig_c). The third position (indicated with red markings) should not b...