Notice PHILIPS FC9228/01 disponible gratuitement après inscription

Extrait de la notice

e filter by tapping the dust out of it over a dustbin. If the motor protection filter is very dirty, you can also rinse it with cold tap water. Do not use washing-up liquid or any other cleaning agent to clean the motor protection filter. 3 Press the clean filter firmly back into the filter compartment to ensure that it is properly placed. Make sure that the motor protection filter is completely dry before you put it back into the filter compartment. Washable Ultra Clean Air HEPA 13 filter The Ultra Clean Air HEPA 13 filter is able to remove 99.95% of all particles down to 0.0003mm in size from the outlet air. This not only includes normal house dust, but also harmful microscopic vermin such as dust mites and their excrements, which are well-known causes of respiratory allergies. Clean the washable Ultra Clean Air HEPA 13 filter every 6 months. You can clean the washable Ultra Clean Air HEPA 13 filter max. 4 times. Replace the filter after it has been cleaned 4 times. 1 Remove the filter grille. ENGLISH15 2 Take out the washable HEPA 13 filter. 3 Rinse the pleated side of the HEPA 13 filter under a hot slow- running tap. -Hold the filter in such a way that the pleated side points upwards and the water flows parallel to the pleats. Hold the filter at an angle so that the water washes away the dirt inside the pleats. -Turn the filter 180° and let the water flow along the pleats in opposite direction. -Continue this process until the filter is clean. Never clean the washable filter with a brush. Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power. 4 Carefully shake the water from the surface of the filter. Let the filter dry at least 2 hours before you put it b...