this case, the cleaning or drying light stops ?ashing and the holder moves to the highest position. Note: If you remove the adapter from the wall socket during the cleaning program, the program aborts. The holder remains in its current position. When you put the adapter back into the wall socket, the holder moves to the highest position. -When the cleaning ?uid drops below the minimum level, the ‘cleaning chamber empty’ symbol starts to ?ash and the holder returns to its starting position. -If you use the Jet Clean System to clean your shaver every day, you need to re?ll the cleaning chamber approx. every 15 days. Cleaning the Jet Clean System Clean the cleaning chamber every 15 days. You can wipe the outside of the Jet Clean System with a damp cloth. 1 Simultaneously press the release buttons on both sides of the Jet Clean System (1). Then lift the Jet Clean System off the cleaning chamber (2). ,The cleaning chamber remains behind. 2 Pour any remaining cleaning ?uid out of the cleaning chamber. You can simply pour the cleaning ?uid down the sink. 3 Rinse the cleaning chamber under the tap. The cleaning chamber is not dishwasher-proof. 4 Fill the cleaning chamber with HQ200 cleaning ?uid to a level between the two lines. 5 Place the Jet Clean System back onto the cleaning chamber. Make sure the release buttons click back into place. ENGLISH14Extra-thorough cleaning method Make sure the appliance is switched off. 1 Pull the shaving head holder off the bottom part of the shaving unit. 2 Slide the green retaining frame in the direction of the arrows indicated on the retaining frame. 3 Lift the retaining frame out of the shaving head holder. 4 Remove the cutter from the shaving guard. Note: Do not cl...