Notice PIONEER GM-3300T disponible gratuitement après inscription

Extrait de la notice

ws could cause the ter- minal area to overheat and could result in damage and injury including minor burns. Engine compart- ment Interior of the vehicle Drill a 14 mm hole into the vehicle body.Insert the O-ring rubber grommet into the vehicle body. Positive terminal GND terminal Power terminal Battery wire System remote control terminal System remote control wire Ground wire Twist Battery wire Ground wire Lug Lug Fuse (30 A) Fuse (30 A)ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ 8 Connecting the Speaker Output Terminals 1.Expose the end of the speaker wires using nippers or a cutter by about 10 mm and twist. 2.Attach lugs to speaker wire ends. Lugs not supplied. •Use pliers, etc., to crimp lugs to wires. 3.Connect the speaker wires to the speaker output terminals. •Fix the speaker wires securely with the termi- nal screws. Using the Speaker Input Connect the car stereo speaker output wires to the amplifiers using the supplied speaker input connector. •Do not connect both the RCA input and the speaker input at the same time. 7Connections when using the speaker input 10mm Twist Speaker wire Lug Speaker output terminal Terminal screw Speaker wire Speaker output Car Stereo Speaker input connector To speaker input terminal of this unit. White: Left + Gray: Right + White/black: Left ? Gray/black: Right ?9 Connecting the Unit Connecting the Speaker Wires The speaker output mode can be two-channel (stereo) or one-channel (mono). Connect the speaker leads to suit the mode according to the figures shown below. •Do not connect both the RCA input and the speaker input at the same time. Two-channel mode (stereo) One-channel mode (mono) (Left) Speaker (Right) Speaker (Mono)...