the rear side of the unit. Insert the hose collar on top ofthe exhaust opening and twist to lock into position. 3)Install the adjustable Window Slider Kit as required (see Fig. 4a & 4b). 4)Install the opposite end of the flexible exhaust hose into the window exhaustadapter. 5)Install the window exhaust adapter into the opening in the slider section, makingsure the window slider sections are secure. 6)Plug the unit into a 115V/60Hz grounded electrical outlet. HORIZONTAL Window Slider Kit: Min.: 265/8” (67.5cm) Max.: 80” (203cm) VERTICAL Window Slider Kit: Min.: 265/8” (67.5cm) Max.: 80” (203cm)Fig. 4aFig. 4b INSTALLATION WINDOWKIT INSTALLATION 6Key Pad Functions: Power Switch:Turn unit ON/OFF FAN: Select from four (4) fan settings:Auto, High,Medium, and Low. MODE: Allows you to scroll through and select thedesired operating mode. CLOCK AUTO-TIMER Fahrenheit/Celsius Selector:Press °F/°C selector toswitch to °F/°C setting. Initial setting is °C. UP DOWN Automatic Cooling Mode Dehumidify Mode Fan Only Mode HIGHFan Speed MEDIUMFan Speed LOWFan Speed The remote operates within a range of 8 meters (26ft.)from the receiver located inside the mainunit. Any obstruction between the receiver and remote may cause signal interference, limiting theability to program the main unit. This Class Bdigital apparatus complies with Canadian ICES-003 a)This switch is used when unit needstemporary turning on/off.b)When pressed, unit starts running. The running mode and fanspeed mode are set at auto. c)Press emergency button again untilunit stops running. Launch Indicator Clock Indicator TIMERsetting Indicator TIMERON/OFF SETTINGTEMPERATURE Indicator °F/°C Indicator Running Indicator FANSPEED Indicator Red/Green Indicator Blue Indicator Red/Green I...