Notice PURLINE CHD210A disponible gratuitement après inscription

Extrait de la notice

niture, pillows, bedding, papers, clothes and curtains at least 0.9m from the front of the heater and keep them at least 0.3m from the sides and rear. 12. A heater has hot and arcing or sparking parts inside. It must not be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmosphere. 13. This heater is not intended for use in wet or damp locations. Never locate a heater where it may fall into a bathtub or other water container. 14. This heater is intended for general use only. 15. Do not use the heater outdoors. WARNING : REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT USE THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES. DESCRIPTION OF THE HEATER 16 3 1 2 1. Power indicator 2. Heat/fan select button 3. Temperature controlling/thermostat HEATER CONTROL 17 OFF… Unit is OFF FAN …. Fan only operation LOW… Speed 1: 1000 watts HIGH… Speed 2: 2000 watts OPERATION: 1. Carefully remove your heater from the box and bag. 2. Make sure that the heater is in the OFF position before plugging the heater into a outlet. 3. Place the heater on a firm, level surface. 4. The power light will light up when initially plugging the heater into an outlet. 5. For heater operation, set the Thermostat knob to the maximum setting. 6. Set Power knob to the desired heat setting. Low heat (1000W) and High heat (2000W) . 18 7. For fan-only operation, without any heat output, turn Power knob to the fan setting represented by FAN. 8. The Power light will remain lit during operation. 9. To disconnect heater, turn Po...