Notice PURLINE CHD300D disponible gratuitement après inscription

Extrait de la notice

bedding, papers, clothes and curtains at least 0.9m from the front of the heater and keep them at least 0.3m from the sides and rear. 12. A heater has hot and arcing or sparking parts inside. It must not be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmosphere. 13. This heater is not intended for use in wet or damp locations. Never locate a heater where it may fall into a bathtub or other water container. 14. This heater is intended for general use only. 15. Do not use the heater outdoors. WARNING : REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT USE THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES. DESCRIPTION OF THE HEATER When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure sufficient ventilation. The smell will subside. 1. Thermostat. 2. Power knob. 3. Metal mesh. 4. Tip over switch. 5. Power light. 2 1 3 4 5 Power knob : 0---- STOP ---- Fan only I----- 750 W (low speed) II----1500 W (high speed) Thermostat knob : Gauche (-) : STOP Droite (+) : Maximum OPERATION : 1. Carefully remove your heater from the box and bag. 2. Make sure that the heater is in the OFF (0) position before plugging the heater into a outlet. 3. Place the heater on a firm, level surface. 4. The power light will light up when initially plugging the heater into a outlet. 5. For heater operation, set the Thermostat knob to the maximum setting (+). 6. Set Power knob to the desired heat setting. Low heat (750W) is represented by the I and High heat (1500W) by the II. 7. For fan-only operation, without any heat output, turn Power knob to the...