Notice Rosières HVI990IN

Notice Rosières HVI990IN disponible gratuitement après inscription

Accédez à la notice du Rosières HVI990IN en adhérant à la communauté.

Notice d’utilisation de votre Rosières HVI990IN. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre HVI990IN.

Notices - manuels - modes d'emploi disponibles pour Rosières HVI990IN après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

illé de s’adresser à un technicien qualifié pour le branchement électrique.9 Control panel - Fig. 1 - a. "ON" indicator light b. Light ON-OFF button c. Motor OFF button d. e. f.Motor speed buttons speed 1 (d.), speed 2 (e.), speed 3 (f.) Use of the hood It is advisable to switch on the extractor hood a few minutes before starting cooking and then to leave it running for approximately 5 minutes afterwards to ensure that all odours are extracted. Maintenance Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. Metal grease filter The metal grease filter lasts forever and must be washed either by hand or in the dishwasher (65°C) with suitable detergents. The grease filters must be washed at least once a month. Let the filter dry without damaging it before putting it back into place. To remove the metal grease filter - Fig. 2: 1.Disconnect the hood from the electricity. 2.a - push toward the centre b - pull the filters downwards. Carry out the above steps in reverse order to put the filters back after having washed them. Carbon filter (“recirculation mode only”, see next pages) The carbon filter cannot be washed nor regenerated. The carbon filter should be replaced every 6 months under normal use. To fit the carbon filter - Fig. 3: 1.Disconnect the hood from the electricity. 2.Remove the metal filters. 3.Fit the carbon filter and fix it to the body of the hood with two supplied screws 4.Put the metal filter back into place. To replace the carbon filter - Fig. 3: 1.Disconnect the hood from the electricity. 2.Rem...

Produits Rosières les plus consultés

En cours...