Notice SEVERIN AH7908 disponible gratuitement après inscription

Extrait de la notice

from its wall bracket. -If required, fit any of the nozzle attachments provided to the suction aperture. -Switch on the appliance using the On/Off switch. -If the vacuuming power decreases during operation, the appliance will automatically switch off to prevent the battery from being over-discharged. Recharge the battery if this occurs. Crevice tool The crevice tool can be inserted into the suction aperture to clean crevices, corners and other areas difficult to reach. Crevice brush The crevice brush can be fitted to the crevice tool and is suitable for cleaning uneven surfaces such as computer keyboards etc. Cleaning General ?Before cleaning the appliance, remove the vacuum cleaner from the wall bracket. ?To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in water. -If necessary, the housing may be wiped with a damp cloth. Wipe dry afterwards. To empty the dust container Reduced vacuuming power despite a fully charged battery pack indicates that the dust container and filter inlay must be emptied. -Hold the vacuum cleaner in your hand -Push the release button, open the dust container in a downward and forward direction, remove the filter and empty it. -The filter can be cleaned by slightly tapping it or by using a brush. Should the filter be visibly dirty, it should be thoroughly cleaned with soapy water (make sure to let it dry completely afterwards) or replaced by a new one. Only then may the vacuum cleaner be used again. Battery pack ?This appliance contains a nickel-metal hydride (Ni-MH) rechargeable battery pack, which may be removed for replacement or disposal. When replacing the battery pack, ensure that only an original battery pack is used. Ni-Mh -The batter...