Notice SHARP AY-XP12FR disponible gratuitement après inscription

Extrait de la notice

to 7 metres away. LOADING BATTERIES Use two size-AAA (R03) batteries. HOW TO USE THE REMOTE CONTROL Remote controlcover + -+ -ENGLISH E-7 CAUTION •Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. •Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. •The unit can be affected by signals transmitted from the remote control of a television,VCR or other equipment used in the same room. •Do not leave the remote control in direct sunlight or near a heater. Also, protect the unit and remote control from moisture and shock which can discolour or damage them. SET CURRENT CLOCK TIME There are two clock modes: 12-hour mode and 24-hour mode. 1To set to the 12-hour mode, press theCLOCK button once in the first step. To set to the 24-hour mode, press theCLOCK button twice in the first step. 2Press the TIME ADVANCE or REVERSEbutton to set the current time. •Keep the button pressed to advance orreverse the time display quickly. 3Press the SET/C button. •The colon (:) blinks to indicate that theclock is functioning. NOTE: •The current time cannot be set when the timer is operating. 1 2 3 Example: 5 o’clock in the afternoon ClockDisplay 12-hour modePM 5:00 24-hour mode17:00 SWING CLEAN FAN MODE SET/C 1hPress the THERMOSTAT button to set thedesired temperature. AUTO/DRY MODE •The temperature can be changed in 1°C in-crements within the range of 2°C higher to 2°C lower from thetemperature automati- cally determined bythe air conditioner. COOL/HEAT MODE •The temperature canbe set within the range of 18 to 32°C. SWIN...