te 1Press MENU. Note the $ mark indicates that the menu continues. Press the Easy scroll key downward to see the next items. (Continued) MemosearchProgramplayPrograminputGroupselect CD1 PlayercheckMemoloading MemoryclearContrastadjust CD1 asterplayer=CD1/300discsM CD1 asterplayer=CD1/300discs =CD3/51discsnd M 2player CD1 MemosearchProgramplayPrograminputGroupselect CD1 PlayercheckMemoloading MemoryclearContrastadjust CD18GB Getting Started 3Move the cursor to “Memo loading,” then press the Easy scroll key. When you connect another CD player, “2nd player” also appears. 4When you want to load all Disc Memos (the master player’s, second CD player’s*, and both player’s Group Memo data), move the cursor to “All memo data,” then press the Easy scroll key. The remote starts reading all memo data. The loading time may take a few moments. Point the remote at the player while loading the data. *The second CD player’s Disc Memo data must be loaded to the master player before you load the data to the remote. Keep the remote 1 – 2 m away from the player while loading the data. When you want to load each Disc Memo data independently, move the cursor to the data you want to load, then press the Easy scroll key. 5When the remote finishes reading the data, “Memo loading complete” appears in the remote’s display. Adjusting the display contrast of the remote 1Press MENU. Turning off the LCD back light You can conserve the remote’s power by turning off the LCD (Liquid Crystal Display) back light. 1Press MENU. 2Move the cursor (”) to “Back light mode” by using the Easy scroll key, then press the Easy scroll key. 3Move the cursor to “OFF,” then press the Easy scroll key. Note If you erase all the data stored in the remote (page 9), f...