you use the remote, make sure to turn on the main unit. •you connect this player to a receiver/amplifier supplied with the RM-TP501, RM-TP501E, or RM- LJ301 remote control. In this case, you need to turn off this player’s 2-way remote system. To turn off this player’s 2-way remote system, see “To turn off the 2-way remote system” on page 8. ComponentGetting Started 8GB To turn off the 2-way remote system You may need to turn off the player’s 2-way remote system depending on which components you connect to this player. See “Understanding the 2-way remote system” on page 7 to see if you need to do so. Even though you turn off the player’s 2-way remote system, you can use the remote supplied with the player by pointing the remote toward the unit such as a receiver that the 2-way remote system is turned on. In this case, position the player in the proximity of the unit that the 2-way remote system is turned on. 1Press MENU/NO. 2Turning the JOG dial until “2WAY OFF ?” appears in the display window. 3Press YES. To return to normal setting After following steps 1 and 2, and “2WAY ON ?” is displayed, then press YES. If you connect to the Sony CD player CDP-CX260 or CDP-CX88ES, press OPERATE on the transmitter/ receiver to turn it off, and set the 2-way remote system of the player to on. Note If you use this player with a receiver/amplifier, turn the receiver/amplifier on when using this player. MENU/NOYES How to use the remote Press ?/1 on the player to turn on the player. If the following message appears in the remote’s display while setting up the remote, point the remote at the main player. an'treceiveelPaseturn toamainunithi C tsREMOTE You can select an item shown in the remote’s display by moving the cursor (B). To move the c...