Notice SONY DSC-HX300 disponible gratuitement après inscription

Extrait de la notice

Battery insertion slot eaBattery eject lever esAccess lamp edMemory card slot efTripod receptacle •Use a tripod with a screw less than 5.5mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. *Supports Micro USB compatible device.GB10 Inserting the battery pack 1Open the cover. 2Insert the battery pack. •While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion. •Closing the cover with the battery inserted incorrectly may damage the camera. Battery eject leverGB11 GB Charging the battery pack 1Connect the camera to the AC Adaptor (supplied), using the micro USB cable (supplied). 2Connect the AC Adaptor to the wall outlet (wall socket). The Power/Charge lamp lights orange, and charging starts. •Turn off the camera while charging the battery. •You can charge the battery pack even when it is partially charged. •When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack. For customers in the USA and Canada Power cord (Mains lead) Power/Charge lamp Lit: Charging Off: Charging finished Flashing: Charging error or charging paused temporarily because the camera is not within the proper temperature rangeGB12 •If the Power/Charge lamp on the camera flashes when the AC Adaptor is connected to the wall outlet (wall socket), this indicates that charging is temporarily stopped because the temperature is outside the recommended range. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF). •The battery pack may...