Notice SONY DSC-RX10

Notice SONY DSC-RX10 disponible gratuitement après inscription

Accédez à la notice du SONY DSC-RX10 en adhérant à la communauté.

Notice d’utilisation de votre SONY DSC-RX10. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre DSC-RX10.

Notices - manuels - modes d'emploi disponibles pour SONY DSC-RX10 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

the sound of the aperture ring will be recorded. BWi-Fi sensor (built-in)GB11 GB C (N Mark) •Touch the mark when you connect the camera to a smartphone equipped with the NFC function. •NFC (Near Field Communication) is an international standard of the short-range wireless communication technology. DBattery eject lever EBattery insertion slot FConnection plate cover Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below. •Make sure that the cord is not pinched when you close the cover. GBattery cover HTripod socket hole •Use a tripod with a screw less than 5.5mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. *For details on compatible accessories for the multi interface shoe, visit the Sony web site, or consult your Sony dealer or local authorized Sony service facility. You can also use accessories that are compatible with the accessory shoe. Operations with other manufacturers’ accessories are not guaranteed.GB12 Inserting the battery pack 1Open the cover. 2Insert the battery pack. •While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion. •Closing the cover with the battery inserted incorrectly may damage the camera. Battery eject leverGB13 GB Charging the battery pack 1Connect the camera to the AC Adaptor (supplied), using the micro USB cable (supplied). 2Connect the AC Adaptor to the wall outlet (wall socket). The charge lamp lights orange, and charging starts. •Turn off the camera while charging the battery....

En cours...