Notice SONY HT-BE1 disponible gratuitement après inscription

Extrait de la notice

ssing SHIFT, press SOUND FIELD. DSG is displayed on the diplay window of the subwoofer. 3While pressing SHIFT, press VOLUME +/–. Each time you press VOLUME +/–, the speaker is selected and displayed in the following order. After the speaker of which parameter you want to specify appears, press SOUND FIELD while pressing SHIFT again. DSG (Dynamic Sound Generator) (page 20) T r DRC (Dolby Dynamic Range Control) (page 19) r AUTO (page 23) r F-DST (FRONT DISTANCE) (page 14) r C-DST (CENTER DISTANCE) (page 14) r R-DST (REAR DISTANCE) (page 14) 4While pressing SHIFT, set the parameter using VOLUME +/–. 5Repeat Steps 2 to 4 to set other parameters. If you do not operate the remote for a few seconds, the parameter turns off and is stored in the system. ?/1 (POWER) SHIFTSOUND FIELD VOLUME +/– continued14GB Specifying the speaker parameters on the subwoofer 1Press ?/1 (POWER) to turn on the subwoofer. 2Press MENU/ENTER. 3Turn the VOL/SELECT knob (SETUP is displayed) , and then press MENU/ENTER. 4Turn the VOL/SELECT knob to select the speaker of which parameter you want to specify, and then press the MENU/ENTER. •F-DST (FRONT DISTANCE) •C-DST (CENTER DISTANCE) •R-DST (REAR DISTANCE) 5Turn the VOL/SELECT knob to set the speaker parameter, and then press MENU/ENTER. 6Repeat Step 2 to 5 to set other parameters. zWhen you press MENU/ENTER for more than 2 seconds while setting on the subwoofer, the display will be returned to the previous menu. Parameters The following are the parameters. xF-DST (FRONT DISTANCE) Set the distance from the front speakers to the listening position. Front speaker distance can be set in 0.2 meter (1 foot) steps from 0.2 to 5 meters (1 to 16 feet). The default figure is 2.4 meters (8 feet). xC-DST...