nished, the /CHG lamp on the digital still camera goes out. •When the batteries are run down, it takes longer to charge this unit. 5The flash mode of the digital still camera compatible with the advanced accessory shoe can be changed in the following order by the mode button on this unit. // mode photography This unit performs a pre-flash, the disital still camera calculates the ideal light intensity, and make this unit flash.16-GB Using the flash (continued) mode photography This unit automatically adjusts the light intensity and fires with the ideal light intensity. mode photography The mode in which the user can set the light intensity. The light intensity can be selected using the “light intensity change button” on this unit by the following procedure. 1/11/21/41/81/161/32 GN32 (22)GN22 (16)GN16 (11)GN11 (8)GN8 (6)GN6 (4) * Values within brackets ( ) applies when using the wide panel •To obtain the shooting distance 1Press the mode button and select . 2Set the guide number by changing the light intensity. 3The distance is obtained from the aperture (F-value) of the digital still camera (use in the manual mode). Distance = Guide Number ÷ Aperture setting (F)17-GB •To obtain the guide number 1Press the mode button and select . 2Set the aperture on the digital still camera. 3From the formula for distance and aperture obtain the optimum guide number, and select it using the light intensity change button. Guide Number = Aperture setting (F) × Distance For Guide Numbers, refer to “Specifications”. (p. 29) PNote Do not close the light exposure meter or the ideal light intensity will not be obtained. 6 AF illuminator PNote Do not bring the AF illuminator close to person’s eyes, and flash. To select the AF illuminator If the dig...