Notice SONY M-800V disponible gratuitement après inscription

Extrait de la notice

speaker. tThe earphone is plugged in. tThe volume is turned down completely. The sound drops out or comes with excessive noise. tThe volume is turned down completely. tThe batteries are weak. Replace both batteries with new ones. tThe head is contaminated. See “Maintenance”. tDirect placement of the cassette tape on the speaker resulted in magnetization and deteriorated tonal quality. tUse the unit away from radiowave-emitting devices such as cellular phones. The pitch of the sound is unstable. tThe batteries are weak. Replace both batteries with new ones. tThe capstan and the pinch roller is contaminated. See “Maintenance”. Tape speed is too fast or too slow in the playback mode. tImproper setting of the TAPE SPEED switch. Set it to the same speed as that used for recording. tThe batteries are weak. Replace both batteries with new ones. Tape speed is faster than the normal playback speed. tThe FAST PB switch (M-850V only) is slid in the direction of the arrow. Chattering noise is heard. tThe reset button of the tape counter is accidentally held and pressed. Press the button again to reset the counter to “000.” Rattling noise is heard after the end of the tape is reached in fast forwarding or rewinding operation. tPress Tx to stop fast forwarding or rewinding. Maintenance (see Fig. E) To clean the tape head and path Press nN and wipe the head 1, capstan 2 and the pinch roller 3 with a cotton swab, moistened with alcohol every 10 hours of use. To clean the exterior Use a soft cloth slightly moistened in water. Do not use alcohol, benzine or thinner. Specifications Tape (normal position type) Recording system 2-track 1-channel monaural Speaker Approx. 2.8 cm dia. Tape speed 2.4 cm/s, 1.2 cm/s Frequency range 300 Hz - 4...