Notice SONY MDS-S707 disponible gratuitement après inscription

Extrait de la notice

ording Pause recording*? (or MD P). Press the button again to resume recording. p Take out the MD§ after stopping recording *Whenever you pause recording, the track number increases by one. For example, if you paused recording while recording on track 4, the track number increases by one and recording continues on the new track when restarted. To protect an MD against accidental erasure To make it impossible to record on an MD, slide the tab in the direction of arrow, opening the slot. To allow recording, close the slot. Rear of the disc Slide the tab in the direction of arrow Record-protect tab Note If “Din Unlock” or “Cannot Copy” appears in the display, recording through the digital connector is not possible. In this case, record the program source through the LINE (ANALOG) IN jacks with INPUT set to ANALOG. When ”TOC“ flashes in the display The deck is currently updating the Table Of Contents (TOC). Do not move the deck or pull out the AC power cord. Changes to an MD made through recording are saved only when you update the TOC by ejecting the MD or changing the deck to standby by pressing .Basic Operations 8EN 4 Press ?(or MD ·). The deck starts playing. Adjust the volume on the amplifier. Playing an MD You can locate and play back a track while the deck is stopped 1Turn AMS (or press MD = or MD +) until the number of the track you want to play appears. 2Press AMS or ? (or MD ·). To use headphones Connect them to PHONES jack. Use PHONES LEVEL to adjust the volume. Adjust the headphone volume. Connect the headphones. Pause playing Stop playing Do the following: Press p. Press ? (or MD P). Press the button again to resume playing. To Turn AMS counterclockwise (or press MD = on the remote). Go...