Notice SONY MZ-R37 disponible gratuitement après inscription

Extrait de la notice

asily make digital recordings of a digital source on an MD. Before synchro-recording, make connections to the digital source with a digital cable, and insert a recordable MD. Recording with digital input (optical cable required) Connect to a digital source using the supplied optical cable, or POC-5B or POC-5AB (not supplied) to make digital recordings. Digital recording is possible even from digital equipment with different sampling rates, such as a DAT deck or a BS tuner, using the built-in sampling rate converter. SYNCHRO REC (at the bottom) Portable CD player, etc. Optical mini- plug Optical plug CD player, MD player, digital amplifier, etc. to (OPTICAL) LINE IN POC-5B (not supplied) etc. Optical connecting cord (supplied) etc. CD players, etc. continued p•CHARGE (OPTICAL) LINE IN jack is for both digital and analog input The recorder automatically recognizes the type of line cable and switches to digital or analog input. To stop recording, press p. Notes •You can make a digital recording only from an optical type output. •When recording from a portable CD player, play it on AC power and disable the anti-skip function (such as ESP*). •Digital output may be disabled on some portable CD players when the player is not run on AC power. * Electronic Shock Protection 1Insert a recordable MD and start recording. For recording operations, see “Recording an MD right away !” (page 6). To record from a portable CD player, set the CD player to pause and then start recording.12-GB Recording from a microphone Connect a stereo microphone (ECM-717, ECM-MS907, ECM-MS957, etc.; not supplied) to the MIC (PLUGINPOWER) jack. to MIC (PLUG IN POWER) Stereo microphone 1Slide SYNCHRO REC to ON. “SYNC” appears in the di...