Notice SONY SCD-XE597 disponible gratuitement après inscription

Extrait de la notice

tions during play are explained below. 1Turn on the amplifier. Turn down the volume level to the lowest. 2Select the player position using the input selector on the amplifier. 3Press POWER on the player to turn on the player. 4Press A on the player to open the disc tray, and place a disc on the tray. 5Press H. Playback starts from the first track. If you want to start playing from a specific track, turn l AMS L (or press ./> on the remote repeatedly) to select the track number before pressing H. 6Adjust the volume on the amplifier. Basic operations during play Tip If you turn on the player when a disc is already loaded, playback starts automatically. If you connect a commercially available timer, you can set it to start playing the disc at any time you want. Note During playback, increase the volume level gradually starting from the lowest level. The output from this player may contain band width that is out of the normal listening range. This may cause damage to the speakers or ears. Selecting the playback layer When playing a hybrid disc with an SA-CD layer and a CD layer (page5), you can select the layer you want to listen to. Also, since both layers are on one side, it is not necessary to turn the disc over. Press SA-CD/CD to select the desired playback layer. To select the default playback layer 1Press MENU on the player. 2Turn l AMS L (or press ./> on the remote repeatedly) until “LAYER SEL” appears in the display. 3Press l AMS L (or ENTER on the remote). The current default layer appears. 4Turn l AMS L (or press ./> on the remote) to select the desired playback layer. 5Press l AMS L (or ENTER on the remote). Selecting the playback area When playing a disc with the 2 channel playback a...