Notice SONY TA-FE370 disponible gratuitement après inscription

Extrait de la notice

ion ends. However, as long as the EON LINK indicator lights up, you can receive EON programmes automatically. •Make sure to cancel EON reception before starting to record since an EON programme may interfere with your recording. •If you activate the Tape Monitor function (see page 9) while the EON LINK indicator is lit, the indicator goes off and you cannot receive EON programmes. If this happens, deactivate the Tape Monitor function so that the indicator lights up again.9GB Basic Operations Recording 1Press ?/1 to turn on the amplifier. 2Turn on the programme source you want to record. 3Turn INPUT SELECTOR to select the programme source you want to record. To record aSelect RecordPHONO Radio broadcastTUNER Compact discCD Source connected to AUXAUX Source connected to: – TAPE1/DATTAPE1/DAT – TAPE2/MDTAPE2/MD 4Prepare the recording component for recording, then start recording. 5Start playing the programme source. Tips •You can record the same source on two recording components at the same time •You can monitor the recorded sound if the tape deck you are recording on has separate playback and recording heads (Tape Monitor function) (TA-FE570 only). To monitor the sound, press TAPE1 MONITOR. Note that you can monitor the only sound being recorded from the TAPE1/DAT jacks.10GB Additional Information Troubleshooting If you experience any of the following difficulties while using the amplifier, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. No sound output. •Connect the audio connecting cords firmly. •Connect the amplifier and other audio components correctly. •Turn INPUT SELECTOR to the appropriate programme source. •Set SPEAKERS to ON. No au...