Notice THOMSON ROC 36 disponible gratuitement après inscription

Extrait de la notice

hen goes off). 3.Press the TV key (2), then follow one of the programming methods (A, B, CorD) described earlier. 4.Hold down the S key (17)until the red indicator lamp (1) remains lit (the indicator light remains on for a few seconds to give you the time to proceed with the following steps. The indicator lamp flashes when this time is almost up, and then goes off). 5.Press the VCR key (2), then follow one of the programming methods (A, B, C orD) described earlier. EN 01-ROC 36 GB 26/02/04 18:22 Page 45 EN 7 - The NAVILIGHTsystem The THOMSON NAVILIGHT system allows you easy access to the settings of your television (TV) or video recorder (VCR). 1.Switch on the product you want to control. 2.Select the type of product concerned. In the VCRposition, make sure that the AV mode is activated for the TV set (the SCART socket must be selected). 3.Press the S/SHIFTkey (17) once and then press a/MENU(6). 4.To travel through the setting menus, press the S/SHIFTkey (17) and then use the up, down, left, right(7and 16). You must press the S(17) key and arrow key at the same time. You must press the S (17) key for every arrow key press and release. 5.Validate with S/SHIFT (17) + /OK(8). 6.To exit the menu, press the S/SHIFTkey (17) once and then press I/EXIT(15). To choose, proceed as follows: 1.Press the TVkey (2) (the remote control must be in TV mode for this procedure). 2.Hold down the Skey (17) until the red indicator lamp (1) remains lit (the indicator light remains on for a few seconds to give you the time to proceed with the following steps. The indicator lamp flashes when this time is almost up, and then goes off). 3.Release the Skey (17). 4.Press the key (8) for around 8 seconds. The indicator light will blink and then go off for about 8 se...