Notice VOX Aga30 disponible gratuitement après inscription

Extrait de la notice

es a monaural output. When a stereo signal is input to the AUX IN jack, it will be converted to monaural inside the amplifier.12 AGA30 Owner’s manual Controlling the Amplifier with VFS2 Dual Foot Switch Using an optional VFS2 dual foot switch connected to the FOOT SW jack on the rear panel of the AGA30 enables you to use your foot to turn the Effect Bypass on or off (disabling or enabling the reverb and chorus effects), and switch All Mute on and off. NOTE:You must connect or disconnect the foot switch while the power is off. Malfunctions or damage may occur if you connect or disconnect the foot switch while the power is on. Switching Effect Bypass on and off (Switch 1) If you use switch 1 of the VFS2 to turn effect bypass on, all effects will be bypassed regardless of how the front panel EFFECTS knob is set. Effect bypass will be cleared when you press switch 1 once again or use the front panel EFFECTS knob. Switching All Mute on and off (Switch 2) The VFS2 Switch 2 works in the same way as the ALL MUTE switch on the front panel (see “ALL MUTE switch” on page 9). Pressing the Switch 2 will switch All Mute on or off.13 Block Diagram14 AGA30 Owner’s manual Specifications I/Os:(TUBE PRE CH) GUITAR, MIC (NORMAL CH) GUITAR (Common) AUX IN, TUNER/DIRECT OUT(unbalanced), FOOT SW Phantom Power:+12V Effects:REVERB, CHORUS, REVERB+CHORUS Output Power:30 watts RMS into 4 ohms Speaker:VOX original (6.5 inches 4 ohms) full-range speaker Power Source:AC, local voltage Power Consumption:38 W Dimensions (W x D x H):303 x 226 x 258 mm / 11.93 x 8.90 x 10.16 inches Weight:6.5 kg / 14.33 lbs Accessory:Power cable, Owner’s manual Optional Item:VFS2 Dual Foot Switch * Specifications and appearance are subject to change without notice for improvement.16 AGA3...