Notice YAMAHA CDX-396 disponible gratuitement après inscription

Extrait de la notice

ect. (See the illustration inside the battery compartment.) cRemove the batteries if the remote control will not be used for an extended period of time. cIf batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Remote control operation range Notes cThere should be no large obstacles between the remote control and the main unit. cIf the remote control sensor is directly illuminated by strong lighting (especially an inverter type fluorescent lamp etc.), the remote control might not work properly. In this case, reposition the main unit to avoid direct lighting. CDX-396CDX-596, CDX-496 30°30° Remote controlsensor 2 1 3 Within approximately6 m CDX-596CDX-496CDX-396 OPEN/CLOSEDIMMERSYNCHRO PEAKTIMESPACE PROGCLEARTAPE RANDOMREPEAT 321 654 987 INDEX+I0 OUTPUT LEVEL+– 0 OPEN/CLOSEDIMMERSYNCHRO PEAKTIMESPACE PROGCLEARTAPE RANDOMREPEAT 321 654 987 INDEX+I00English E-5 CONNECTIONS cBefore making any connection, switch OFF the power to the unit and the amplifier or other component. cConnections should be made to the correct input terminals of the amplifier or another component. cIf the placement of this unit causes noise to another equipment, such as a tuner, separate them from each other. When the LINE OUT (analog) terminals of this unit are used ( 1 ) Connect these terminals to the “CD” (or “AUX”) terminals of the amplifier. For additional details concerning these connections, refer to the operation instructions of the amplifier being used. *Be sure that the left (“L”) and right (“R”) of these terminals are connected to the corresponding (left and right) terminals of t...