Notice YAMAHA RX-V495 disponible gratuitement après inscription

Extrait de la notice

omething drops into the set, contact your dealer. 4.Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves. 5.The openings on the unit cover assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in a well-ventilated area to prevent fire and damage. <Singapore model only> Be sure to allow a space of at least 20 cm behind, 20 cm on the both sides and 30 cm above the top panel of the unit to prevent fire and damage. 6.The voltage used must be the same as that specified on this unit. Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. 7.Digital signals generated by this unit may interfere with other equipment such as tuners, receivers or TVs. Move this unit farther away from such equipment if interference is observed. 8.Always set the VOLUME control to “” before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started. 9.Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 10.Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty. 11.When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. 12.To prevent lightning damage, di...