Notice YAMAHA RX-V595A

Notice YAMAHA RX-V595A disponible gratuitement après inscription

Accédez à la notice du YAMAHA RX-V595A en adhérant à la communauté.

Notice d’utilisation de votre YAMAHA RX-V595A. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre RX-V595A.

Notices - manuels - modes d'emploi disponibles pour YAMAHA RX-V595A après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

all this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water. 3.Never open the cabinet. If something drops into the set, contact your dealer. 4.Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves. 5.The openings on the cover assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in a well-ventilated area to prevent fire and damage. <China model only> Be sure to allow a space of at least 20 cm behind, 20 cm on both sides and 30 cm above the top panel of the unit to prevent fire and damage. 6.The voltage used must be the same as that specified on this unit. Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified. 7.Digital signals generated by this unit may interfere with other equipment such as tuners, receivers and TVs. Move this unit farther away from such equipment if interference is observed. 8.Always set the VOLUME control to “” before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started. 9.Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 10.Be...

En cours...