Notice SAMSUNG WEP 450

« approvals.....................................................................8 UL certified travel adapter........................................................9 Cautions..............................................................................10 Warranty and parts replacement..............................................10 Specifications.......................................................................122 Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide. Bluetooth QD ID: B014567 •Never disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. Bring the headset to an authorized service center to repair it or replace the battery. •When using your headset while driving, follow local regulations in the country or region you are in. •Avoid storage at high temperatures (above 50° C/122° F), such as in a hot vehicle or in direct sunlight, as this can damage performance and reduce battery life. •Do not expose the headset or any of its supplied parts to rain or other liquids. Safety and usage information At very high volumes, prolonged listening to the headset can damage your hearing.3 English Your headset overview Volume down button Earpiece Microphone Talk buttonVolume up button Indicator light Earhook Adapter jack4 Put the charger into the jack on the headset and into the electrical outlet. Charge the headset until the red indicator light turns blue. Charging the headset Do not attempt to charge the headset with anything other than the charger provided.5 English To turn the headset on, press and hold the talk button until the blue indicator light flashes 4 times. To turn the headset off, press and hold the talk button until both blue and red indicator lights flash. •Standby mode: The headset is waiting for a call. The blue indicator light flashes every 6 seconds. •Active mode: The headset has a call in progress. The blue indicator light flashes every 8 seconds. •Pairing mode: The blue indicator light stays lit. You can discover and connect to your headset on your phone. •Low battery mode: There is less than 10% of battery power left. The red indicator light flashes. You must recharge the battery. Turning the headset on or off Understanding various modes6 1Enter Pairing mode. •Turn off your headset and press and hold the talk button until the blue indicator light remains lit after blinking. •If you turn it on for the first time, it proceeds into Pairing mode immediately. 2Search for and pair with your phone according to your phone’s user guide. (Bluetooth PIN: 0000, 4 zeros) •If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode. •If the blue indicator light remains lit, retry pairing. Pairing with your Bluetooth phone When the headset and the phone are paired, the headset attempts to reconnect automatically each time it turns on. Otherwise, press the talk button to reconnect.7 English Some functions may not be supported by your phone. In Standby mode Press the talk button to: •Answer an incoming call •Make a voice-activated call Press and hold the talk button to: •Redial the last number called •Reject an incoming call In Active mode Press the talk button to: •End a call •Transfer a call from the phone to the headset Press and hold the talk button to: •Place a call on hold •An... »