Notice KLIPSCH Synergy F3

« E attachments/accessories specified by the manufacturer. 12.USE only with a cart,stand,tripod,bracket,or table specified by the manufacturer,or sold with the apparatus.When a cart is used,use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14.REFER all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally,or has been dropped. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. WARNING: To reduce the risk of fire or electrical shock,do not expose this apparatus to rain or moisture.The product must not be exposed to dripping and splashing and no object filled with fluids – such as as vase of flowers – should be placed on the product. WARNING:Voltages in this equipment are hazardous to life.No user-serviceable parts inside.Refer all servicing to qualified service personnel. CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this device. POSITIONING YOUR SYNERGY SERIES SPEAKERS Before You Start — Some Klipsch speakers have feet and other accessories that may need to be installed prior to use.Please refer to Diagrams 1,2 and 3 for installation. Left and Right Main Channel Speakers — For optimum performance,Klipsch suggests placing your speakers six to 15 feet (2 to 4.5m) apart and at least 24 inches (60.8cm) from the back and side walls.They may also be toed-in slightly for better stereo imaging.The listening position should be about 1 to 1.5 times the distance separating the speakers.Refer to Figures 1,2 and 4 for con- nection and placement. Center Channel Speakers — Center channel speakers are designed to place dialogue and primary sounds so that they appear to come from the video screen.The speakers should therefore be placed as close to the screen as possible,preferably directly on top of or below the screen.Refer to Figures 2,3 and 4 for connection and placement. Rear Surround Channel Speakers — Klipsch WDST™ surround speakers should be placed 5-7' high on the walls directly adjacent to or on the wall behind the listening position.They are designed to recreate the sense of space and ambience that many of today’s surround sound tech- nologies provide.Refer to Diagram 4 and Figures 2 and 4 for connection and placement. CONNECTING YOUR SYNERGY SERIES SPEAKERS TO YOUR AMPLIFIER Conventional Connection — Using 16-gauge or larger speaker wire,connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier’s LEFT chan- nel.Connect the BLACK "negative" (–) terminal of the LEFT speaker to the BLACK "negative" (–) terminal of your amplifier’s LEFT channel.Repeat this procedure for connecting all remaining speakers to the appropriate amplifier channels.Refer to Figure 4.Make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment. Amplifier Requirements — Klipsch spe... »