Notice AC RYAN Playon! HD2

« adding a hard drive, please remove the power from the player. Than remove the lid from the side by pulling down the two small clips, the lid will come off. Slide in the hard drive until it cannot be inserted any further. When this is done you can gently close the lid and you are done. 4 ENGLISH5 ENGLISHConnecting the hardware to your TV 1. Connect the included HDMI cable from the Playon!HD2 to your TV for the highest quality video/audio. 2. Connect one end of the included power adapter jack to your Playon!HD2 and the other end to your wall power socket. 3. To make the player part of your network you can connect your player to your network by using a normal network cable or optional Playon! Wireless dongle (both not included). 6 ENGLISHInitial Setup Choose your: Menu language: Select the language you want to use. Wired Setup: Choose automatic or ?xed IP/DNS address if you have a network cable attached. Follow the instructions on the screen. If you don’t have a network cable attached you can skip this step. If you have installed a new internal hard drive, or this is the ?rst time you use the player, it is recommended to format the internal hard drive. The player will automatically detect this and ask you to format. Follow the instructions on the screen to do so. If the player does not ask for a format by itself you can format the drive by going to Setup in the main menu, choose System and then select HDD Format. Your player will require a reboot after the format and then you are done with the basic setup of your Playon!HD2. Note: When you insert a hard drive with data on it, formatting this hard drive will erase your data. Be sure to make a backup of your data ?rst before formatting your hard drive inside the player. Copy your backup after the format back onto the hard drive inside the player. Please take your time to go through the Setup menu and personalise the settings that you want to use, then you are ready to use your Playon!HD2. Playon! Engage your senses. Alternative options: If your TV does not have a HDMI input, you can use the included Composite cable for both video and audio or the component cable (up to 1080i resolution) for video and the composite cable (red/white) for audio. If you have an Audio/Video Receiver you can connect your audio/video signals through it to receive audio and video with a HDMI, Composite, Component, SPDIF Coaxial or SPDIF Optical TOSLINK cable. ***SPDIF Optical TOSLINK and SPDIF coaxial cables (not included) supports up to 5.1 surround sound. For rich HD Audio in 7.1 surround sound you need to use a HDMI cable. 7 ENGLISHHARTELIJK DANK VOOR DE AANKOOP VAN ONS PRODUCT EN WELKOM BIJ DE PLAYON! COMMUNITY! DIT IS EEN SNELLE INSTALLATIEGIDS OM U TE HELPEN SNEL VAN START TE GAAN MET UW NIEUWE PLAYON!HD2. Inhoud van de Playon!HD2 verpakking: 1 x Playon!HD2 Full HD Netwerk Mediaspeler 1 x Snelle installatiegids 1 x Afstandsbediening 2 x Batterijen 1 x HDMI kabel 1 x Composiet kabel (rood/geel/wit) 1 x Component kabel (rood/blauw/groen) 1 x USB3.0 kabel 1 x Adapter (12V?/?2A) 8 NEDERLANDSVan start met uw Playon!HD2 Uw interne harde schijf installeren. Om te beginnen dient u uw interne harde schijf te installeren. Als u uw Playon!HD2 kocht met een voorgemonteerde harde schijf, kunt u deze stap overslaan. Wilt u een harde schijf naar keuze installeren, volg dan deze stappen... »