Notice MACALLY BTmouse

« register.php. Technical support About problem solving. Many problems can be solved easily. To avoid unneccessary product returns, please follow the steps below when you experience a problem with a Macally product. 1. Make sure that a) your hardware and software meet all system requirements (see package, manual and website), b) the product is connected properly and c) that your computer supports products that you want to connect through our host controllers and hubs. 2. Go to the FAQ-section (fequently asked questions) at http:// www.macally-europe.com/faqlist.php to find a solution to your problem. 3. Contact us for further technical support! In Europe, please call to +31 24 373 14 10 or email to techsupport@macally- europe.com. Technical support hours in Europe are from 9h00 to 17h00 (CET), from Monday to Friday. In USA, please call to +1 626 214 2770 or email to techsupport@macally. com. BTMOUSE Installation 1. Insert the batteries Open the mouse cover on the bottom of the mouse. Insert 2 rechargeable* “AAA” batteries (included) and close the cover. Please refer to the diagram above for the polarity of the battery. Close the cover. * Please DO NOT put non rechargeable batteries in the mouse. Charging can cause explosion, fire and/or personal injuries. Macally will not be liable for any damage!– 3 – 2. Charge the batteries Turn on the computer, connect the cradle to the USB port of your computer and put the BTMOUSE* on the cradle to charge. For first time use, please charge the batteries fully. The complete charging process will take 4 to 5 hours. When the BTMOUSE is fully charged, the light on the cradle will become green. * To charge the batteries completely it is important to switch the mouse off while charging! 3. Pair the BTMOUSE with the computer Before you can use the BTMOUSE you need to pair it with your computer. Bring the BTMOUSE within 25 cm. (1 ft) range from your computer / USB Bluetooth adapter. Hold the mouse upside-down and use a pointed object such as a pen to press on the “CONNECT” button for 1 second and release. The light on top of the mouse will become red. Pairing procedure in Mac OS X v10.2.8 or later Please follow the procedure below to pair the BTMOUSE with the computer: 1. Click on the Bluetooth icon in the Finder and select “Set up Bluetooth Device...” 2. Click “Continue” 3. Select “Mouse” and click “Continue” 4. Press the “Connect” button at the bottom of the mouse. The Bluetooth Setup Assistant will search for the mouse. When the mouse is detected, highlight it, click “Continue”, and wait for the pairing to be completed. 5. Click “Continue” to complete. 6. Click “Quit” to finish and close the Bluetooth Setup Assistant. The BTMOUSE is now ready to use Pairing procedure in Windows Please follow the procedure below to pair the BTMOUSE with the computer: 1. Open “My Bluetooth Places” to launch the “Bluetooth Setup wizard”, select “I want to find a specific Bluetooth device and configure...” and click “Next” 2. In “Bluetooth Devices Selection” windows, select “Show all devices” and click “Search again” or “Refresh”. When the Bluetooth mouse is detected, highlight it and click “Next” 3. Select the Bluetooth Mouse, click “Next” and follow the on- screen steps to finish the setup. The BTMOUSE is now ready to use. 4. Use the BTMOUSE The BTMOUSE is fully recognized by the operating system. No software d... »