Notice MPMAN PC24

« 12: SD card slot 13: Microphone 14: Speaker 15: Lens 16: Self-timer LED 17: Flash strobe 18: Battery cover 3 2. Preparing for using Installing the Battery 1. Open the battery door. 2. Insert three AAA-size batteries with the positive (+) and negative (-) poles matching the directions indicated on the battery cover. 3. Close the battery door 4 Inserting the Memory Card 1. Turn off the camcorder. 2. Find the SD card slot : it is at the bottom of the camcorder. 3. Insert the memory card as illustrated. • Never insert any other object which is not a SD/MMC card into the camera’s SD card slot. Doing so will cerate the risk of damaging to the camera and the card. • To release the memory card press the edge of the card gently. 3. Using this camcorder Turning the Camcorder On and Off Open the LCD panel the camcorder turns on and close the LCD panel the camcorder turns off.. You may turn the camcorder on and off by another way: 5 1. Open the LCD panel. Press the POWER button to turn on the camcorder. 2. Press the POWER button again to turn the camcorder off. Change the record mode There are four record modes in this camcorder. 1: Turn on the camcorder? 2: Press the MODE button to change the mode. Each time the MODE button is pressed the mode icon is changed. Display Title Description Capture mode For taking still photos. Video mode For recording movie clips. Audio mode For recording audio files. Playback mode Preview the record files. 6 Recording a video clip 1: Turn on the camcorder and set the camcorder to video record mode (). 2: Zooming: Moving the joystick upward or downward to zoom in or zoom out the screen. The value of magnification level appears on the LCD monitor. 3: Press the SHUTTER button to start recording. Push the joystick rightward to pause and push it again to continue. 4: Press the SHUTTER again to end the recording. If the memory is full the video camera will stop recording automatically. • On the upper of the LCD monitor displays the recorded time. Taking still images 1. Turn on the camcorder. 2. Press the MODE button to set the camcorder to capture mode, the icon appears on the LCD screen. 7 3. Zooming: Moving the joystick up or down to zoom in or zoom out the screen. the value of magnification level appears on the LCD monitor. 3. Hold the camcorder steady and then press the SHUTTER button down to take a picture. Recording audio 1: Turn the camcorder on and set it to audio record mode. 2: Press the SHUTTER button to start recording. Push the joystick rightward to pause and push it again to continue. 3: Press the SHUTTER again to end the recording. If the memory is full the video camera will stop recording automatically. • On the center of the LCD monitor displays the recorded time. • There is no menu in audio record mode. 8 4. Using the menu in record mode When a menu is displayed, the joystick is used to make the desired setting. The audio record mode doesn’t have a menu. Menu in capture mode 1: Turn on the camcorder and set it to capture mode. 2: Press the MENU button to display the menu. 3: Move the joy... »