Notice KICKER iK501

« cker subwoofers on the map. The rotary control and infrared remote allow simple, streamlined control of your iK501 Stereo System. The iK501 can be used with any 4th generation or newer iPod. In addition, the iK501 boasts a wide range of connectivity options including stereo RCA outputs, composite video output, and an 1/8” stereo auxiliary input for incorporating additional audio devices with your iK501 Stereo System. Note: 3rd Generation and older iPods must use the auxiliary input instead of the Docking Bay. Authorized KICKER Dealer: Purchase Date: Model Number: Serial Number: iPod Model Apple® Adapter # iK501 Adapter Label 1. iPod Nano (2nd Gen) 2GB, 4GB & 8GB 11 NANO 2. iPod Nano (3rd Gen) 4GB & 8GB 13 NANO 3G 3. iPhone 3G 15 iPHONE 3G 4. iPod Nano (4th Gen) 16 NANO 4G 5. iPod Touch (2nd Gen) 17 TOUCH 2G iK501 1. Choose the dock adapter that best ? ts your iPod or use the universal adapter that came with your iPod. See the table below. 2. Attach the adapter to the iK501’s docking bay. 3. Connect your iPod to the iK501’s dock connector. 4. Plug the power cable into the DC input on the back of the iK501. 5. Plug the 2-prong electrical plug into a surge protected electrical outlet. DOCKINGYOURiPod Figure 1 The iK501 docking station has been optimized to match the sonic output of the iPod with the iPod’s EQ in the “Off” setting. The iPod’s “Sound Check” should also be off; otherwise you may experience poor bass response and lower volume levels in your music. 2009 iK501 Multilingual d01.indd 22009 iK501 Multilingual d01.indd 24/23/2009 11:50:12 AM4/23/2009 11:50:12 AM3 IMPORTANTSAFETYINSTRUCTIONS Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent damage to your self, your Kicker product, or your portable entertainment device. The iK501 should not be used near water or in an environment where exposure to liquids is possible. This includes but is not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should not be placed on or near the iK501 Stereo System. The iK501 Stereo System should not be cleaned with liquid cleaners. Use only a dry cloth to clean the iK501. Only use the iK501 in areas with adequate open ventilation allowing at least 4” of space on all sides of the iK501. Do not set the iK501 on any surface or cover the iK501 with any object that could impede the air? ow to and from the iK501 Stereo System. The iK501 should not be placed near any source of heat. This includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where excessive solar heat can be generated. Do not install the iK501 near any ? ame or place any ? ammable objects near the device. The power outlet used to provide power to the iK501 should be accessible at all times. The polarized 2-prong electrical plug has a wide blade and narrow blade that should ? t into the corresponding wide and narrow receiving connections of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not ? t, consult with an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that protects it from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical input on the iK501. Do not run the cable throu... »