Notice TRENDNET TEG-S5g

« nt.2 2. Branchez un câble réseau CAT-5e ou CAT-6 RJ-45 de l'ordinateur vers un port Ethernet disponible du TEG-S5g. 3. LEDs Power (Alimentation) Vert : Sous tension Eteint : Hors tension Link/ACT Vert (Fixe): Relié à un autre périphérique Vert (Clignotant): Activité depuis cette liaison Eteint: Rien n'est détecté sur le port Vitesse Vert: La connexion du port est de 2000Mbps (Full) Eteint: La connexion pour le port est de 100/200Mbps (Half/Full), 10/20 Mbps (Half/Full) ou rien n'est détecté sur le port3 Network Media Standards Switch Fabric Diagnostic LEDs Filtering Table Power Adapter Jumbo Frame Support CSMA/CD, Star ŸEthernet: 10Mbps/20Mbps (half/full-duplex) ŸFast Ethernet: 100Mbps/200Mbps (half/full- duplex) ŸGigabit Ethernet: 2000Mbps (full-duplex) ŸEthernet: Cat. 3, 4, 5, up to 100m ŸFast Ethernet: Cat. 5 up to 100m ŸGigabit Ethernet: Cat. 5, 5e, 6, up to 100m ŸIEEE 802.3 10Base-T ŸIEEE 802.3u 100Base-TX ŸIEEE 802.3ab 1000Base-T ŸIEEE 802.3x Flow Control ŸIEEE 802.3az (draft 2.0) Energy Efficient Ethernet 3 Watts (max) 120 x 72 x 28mm (4.7 x 2.8 x 1.1 in.) Power, Link/ACT, Speed 10Gbps forwarding capacity 1Mbits 8K entries 125 g (4.4 oz) 5V DC, 1A external power adapter 9216Bytes Data Rates Protocol / Topology Power Consumption Interface5 x 10/100/1000Mbps Auto-MDIX RJ-45 ports Data RAM Buffer Dimension Weight Temperature Humidity Certification Hardware ŸOperating: 0° ~ 40° C (32° ~ 104° F) ŸStorage: -10° ~ 70° C (14° ~ 158° F) Max. 90% (non-condensing) FCC, CE Technical Specifications Troubleshooting 4 1. After connecting the Switch to a power outlet, the LEDs do not turn on. 1. Check the connection of the power adapter to the TEG-S5g and the power outlet. 2. Check that the power outlet is receiving power. 2. When I connect a computer to one of the ports on the Switch, the Link/ACT LED turns on, but I am not getting Gigabit speeds. Check the LEDs. If the Speed LED is green, the computer's connection speed is 1000Mbps. If the Speed LED is off, the computer's connection speed is 100Mbps or 10Mbps. 2. Check the Ethernet Cable. Make sure you are using CAT.5e or CAT.6 Ethernet cables. Some CAT-5 cables are not rated to run in Gigabit. 3. Make sure that you have a Gigabit Ethernet Adapter installed on your computer. 3. After I connect my PCs to the Switch, I am unable to share files. 1. Check the LEDs on the Switch. Make sure the Link/ACT LED is on. 2. Check the network cable. The minimum length of the cable is 1.5 meters and the maximum length of the cable is 100 meters. 3. Disable any software firewall program. 4. Verify that you have file sharing enabled. Please contact your Operating System support for more information. 4. After I connect my PCs to the Switch, I can only get onto the Internet from one computer. The Switch was not designed to share Internet between multiple computers. You need to get an Internet router such as the TW100-S4W1CA. 5. Where is the uplink port located on the Switch? Since all the ports on the Switch are Auto-MDIX, any of the ports can be used as an uplink port. If you still encounter problems or have any questions regarding the TEG-S5g please contact TRENDnet's Technical Support Department. 1. Limited Warranty TEG-S5g - 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty TRENDnet warrants its products against defect... »