Notice PHILIPS SRU-1018

« . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 3.Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-68 Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 1.Introduction Congratulations on your purchase of the Philips SRU 1018 universal remote control. The SRU 1018 is a handy zapper with all main keys and ergonomic shape for comfortable control. After installing the remote control it can operate the most-used functions of almost any brand of TV. You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’. 2.Installing the remote control Inserting the batteries 1Press the cover inwards and lift it up. 2Place two R03,UM4 or AAA type batteries into the battery compartment, as shown. 3Replace the cover and click it firmly into place. Testing the remote control Because the SRU 1018 may use different signals for each brand and even for different models of the same brand,it is advisable to test whether your TV responds to the SRU 1018. The example below instructs you how to do this. 1Turn your TV on manually or use the original remote control.Tune to channel 1. 2Check whether all the keys are working. For an overview of the keys and their functions see ‘3.Keys and functions’. –If the TV responds as it should to all of the key commands the SRU 1018 is ready for use. •If the device does not respond at all or not to all of the key commands,follow the instructions under ‘Setting the remote control’or for online setup got to:www.philips.com/urc. 4ENGLISHSetting the remote control This is only necessary if your TV does not respond to the SRU 1018.If that is the case,the SRU 1018 does not recognize the brand and/or model of your TV and you need to program the remote control to do so. The example below instructs you how to do this.You can set the remote control either manually or automatically. Manually setting the remote control 1Turn on the TV manually or use the original remote control.Tune in to channel 1. 2Look up the brand of your TV in the code list at the back of this manual. One or more 3-figurekey codes are shown for each brand. Note the first code. On our website www.philips.com/urc you can directly select your device typenumber to find the right code. Make sure you use the codes from the correct table. 3Keep keys 1and 3on the SRU 1018 pressed simultaneously for five seconds until the indicator light remains lit. 4Then enter the code noted in step 2 using the code keys. –The indicator light will now flash twice.If the indicator light flashes once for an extended period,the code has not been entered properly or the wrong code has been entered.Start again from step 2. 5Point the SRU 1018 at the TV and check that it responds as it should. –If the TV responds to all of the key commands,the... »