Notice PHILIPS SRU-530

« . . . . . . . . . . . . . . 7-8 4.Extra possibilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Adjusting device selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . 9 Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 9 5.Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6.Need help?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 60-73 1.Introduction Congratulations on your purchase of the Philips SRU530 universal remote control.After installing the remote control you can operate a maximum of 3 different devices with it:TV,DVD plyer/recorder and VCR. You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’. 2.Installing the remote control Inserting the batteries1Press the cover inwards and slide it in the direction of the arrow.2Place two AAA type batteries into the battery compartment,as shown.3Slide the cover back and click it firmly into place. Note:If the mode keys (TV,DVD and VCR)blink four times after every key press,the remote control is indicating that its batteries are running low.Replace the old batteries with two new AAA batteries. Testing the remote control The remote control has been programmed to operate most Philips devices. Because the SRU530 may use different signals for each brand and even for different models of the same brand,it is advisable to test whether your device responds to the SRU530.The example below (TV) instructs you how to do this.You can repeat the same steps for other devices (DVD player/ recorder and VCR) which you want to operate using the SRU530. Example of TV:1Turn your TV on manually or use the original remote control. Tune to channel 1.2Press the TV key to select TV. Press the key until it lights up. –If the key does not light up,check whether the batteries are properly inserted (see ‘Inserting the batteries’). 4 Instructions for use English SRU530_86_v6.qxd 26-04-2005 14:21 Pagina 4Instructions for use English 5 3Check whether all the keys are working. For an overview of the keys and their functions see ‘3.Keys and functions’. –If the TV responds as it should to all of the key commands the SRU530 is ready for use. •If the device does not respond at all or not to all of the key commands,follow the instructions under ‘Setting the remote control’,or for online setup go to: www.philips.com/urc. Setting the remote control This is only necessary if your device does not respond to the SRU530. If that is the case,the SRU530 does not recognize the brand and/or model of your device and you need to program the remote control to do so. The example below (TV) instructs you how to do this.You can repeat the same steps for other devices (DVD player/recorder and VCR) which you want to operate using the SRU530. You can set the remote control either automatically or manually. Automatically setting the remote control The remote control will now automatically search for the right code for your device. Example of TV:1Make sure the TV is switched on and select a channel using the original remote control or the keys on... »