Notice PHILIPS AJ 3980

« =The built-in speaker will now be muted on the set. DISPLAY BRIGHTNESS In the dim / medium setting, the backlight isinteractive and gently fades in and out whenever you press a touch screen control. There are 3 settings: brightß mediumß dim •Press REPEAT ALARM/ BRIGHTNESSCONTROLonce or more. SETTING THE CLOCK TIME(see figure 3) The time is displayed using the 12 hour clockwhere the PMindicator lights up (on = PM, off = AM). 1.In the standby mode, press TIME SETto activate the clock setting mode. =The current clock time in the main display flashes. 2.Press HOUR / MINUTEto adjust the hours and minutes respectively. •With your finger held down on HOUR / MINUTE, the display will increase the hours / minutes rapidly and continuously. •Press HOUR / MINUTEbriefly and repeatedly to adjust the time slowly. 3.Press TIME SETagain when you have reached the correct time. =You will hear a double beep to confirm the time setting. SETTING THE ALARM (see figure 3) GENERAL Two different alarm times, ALARM 1and ALARM 2 can be set in the CD/ radio/ buzzer modes. This can be useful when for example you need to be woken up at a different time during the week and at the weekend. SETTING THE ALARM TIME1.In the standby mode, press ALARM 1 / ALARM 2 to select the alarm mode. Check the respective icon appears in the display: CDradio/ buzzer . Either press briefly: •ALARM 1once for CD alarm. This enables CD playback from the first track as your alarm call. •ALARM 2once or more for radio/ buzzer alarm. 2.Press SET AL1or SET AL 2to activate the alarm setting mode. =The current alarm time display flashes. 3.Press HOUR/ MINUTEto adjust the hours and minutes respectively. •With your finger held down on HOUR/ MINUTE, the display will increase the hours / minutes rapidly and continuously. •Press HOUR/ MINUTEbriefly and repeatedly to adjust the time slowly. 4.Press SET AL 1or SET AL 2again when you have reached the correct time. =You will hear a double beep to confirm the time setting. GENTLE WAKE VOLUME A sure way of getting up in the mornings, the gentle wakevolume for the alarm begins from a fixed gentle volume (10) and gradually increases to a maximum higher setting of ( 25.) •The default low volume is uo: 10, and the maximum volume is uo: 25. •During the alarm call, if you press +/ - VOLUME, the volume stops automatically getting louder. CONTROLS (see figure 1) 1SLEEP TIMER- adjusts timer options for CD / radio - switches CD / radio on. 2CD- starts CD playback 3RADIO -switches on radio 4 TIME / ALARM - switches off CD / radio - selects clock display 5WAKE-UP TRACK- programs your favorite CD track for wake-up track alarm. 6PUSH TO OPEN - push this corner to open CD door 7DAILY ALARM RESET - stops the active alarm for 24 hours 8+ / - VOLUME - adjusts the volume 9REPEAT ALARM/ BRIGHTNESSCONTROL - switches off the alarm for a 9 minute period - switches off timer function - changes the brightness of the display window 0Main display - shows clock time and function status - shows radio frequency and CD track number briefly when respective function is in use !Alarm time display- shows the alarm time and the chosen alarm activated: - CD (AL 1 TIME), radio/ buzzer (AL 2 TIME) @ALARM 2 - selects radio/ buzzeralarm - switches radio / buzzer alarm on/ off #Touch Screen ControlsClock controls shown in standby mode. The radio / CD controls appear when the radio... »