Notice PIONEER GM-6100F

Notice PIONEER GM-6100F

Mode d'emploi PIONEER GM-6100F disponible.

Groupe d'entraide des utilisateurs PIONEER GM-6100F
2 membres dans ce groupe pour vous aider
Trouver de l'aide en rejoignant le Groupe d'entraide des
utilisateurs de votre produit GM-6100F

Bienvenue dans le groupe d'entraide des utilisateurs
PIONEER GM-6100F

Le SAV entre consommateurs du groupe d’entraide PIONEER GM-6100F vous permet de recevoir des solutions aux problèmes d’utilisation, conseils d’entretien, fonctionnement et assistance pour votre Amplificateur PIONEER. Rejoignez GRATUITEMENT le groupe d'entraide GM-6100F qui compte 2 membre(s) utilisateur(s) de ce produit. Devenir membre vous donne accès à différents services gratuits pour votre Amplificateur : accès au mode d'emploi PDF et à la notice GM-6100F en français PIONEER GM-6100F, guide de l'utilisateur, avis consommateur et forum actif, manuel d’utilisation, photos, vidéo et informations.

PIONEER GM-6100F

Dernières actualités du groupe d'entraide PIONEER GM-6100F

Nouvelles questions du forum

Lancez la discussion

Nouveaux membres

  • ChristopheDignoire  depuis le 09/12/2012 - Expertise débutant - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 2 894 K | Français

Pas de vidéo disponible

« necting the Unit ..................................5 Connection Diagram ........................................6 Connecting the Power Terminal ........................7 Connecting the Speaker Output Terminals ......8 Using the Speaker Input ....................................8 Connecting the Speakers and Input wires ........9 Installation ................................................11 Example of installation on the floor mat or on the chassis ......................................11 Specifications ..........................................12Before Using This Product 2 ENGLISHESPAÑOLDEUTSCHFRANÇAIS ITALIANONEDERLANDS Thank you for purchasing this PIONEER product. Before attempting operation, be sure to read this manual. In case of trouble When the unit does not operate properly, contact your dealer or the nearest autho- rized PIONEER Service Station. CAUTION Never replace the fuse with one of greater value or rating than the original fuse. Use of an improper fuse could result in over- heating and smoke and could cause dam- age to the product and injury including burns. CAUTION Do NOT install or use your Pioneer ampli- fier by wiring speakers rated at 4 Ohm (or lower) in parallel to achieve a 2 Ohm (or lower) bridged mode (Diagram B). Amplifier damage, smoke, and overheat- ing could result from improper bridging. The amplifier surface could also become hot to the touch and minor burns could result. To properly install or use a bridged mode for a two-channel amplifier and achieve a 4 ?load, wire two 8 ?speakers in paral- lel with Left + and Right - (Diagram A) or use a single 4 ?speaker. For a four-chan- nel amplifier, follow the speaker output connection diagram for bridging as shown on the back of your amplifier, and wire two 8 ?speakers in parallel to achieve a 4 ?load or use a single 4 ?speaker per channel. If you have any questions or concerns, please contact your local authorized Pioneer dealer or call Pioneer customer service. WARNING •Always use the special red battery and ground wire [RD-223], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body. •Do not touch the amplifier with wet hands. Otherwise you may get an electric shock. Also, do not touch the amplifier when it is wet. •For traffic safety and to maintain safe driving conditions, keep the volume low enough so that you can still hear normal traffic sound. •Check the connections of the power supply and speakers if the fuse of the separately sold battery wire or the amplifier fuse blows. Detect the cause and solve the problem, then replace the fuse with another one of the same size and rating. •To prevent malfunction of the amplifier and speakers, the protective circuit will cut the power supply to the amplifier (sound will stop) when an abnormal condition occurs. In such a case, switch the power to the system OFF and check the connection of the power supply and speakers. Detect the cause and solve the problem. •Contact the dealer if you cannot detect the cause. •To prevent an electric shock or short-circuit during connection and installation, be sure to disconnect the negative (–) terminal of the battery beforehand. •Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Be sure to protect all cables and important equipment such as fuel lines, brake lines... »

Activité de ce groupe d'entraide

Note moyenne du groupe
Soyez le premier à noter ce produit
Durée moyenne d’utilisation
4 ans 8 mois
Pas d'avis consommateur
Donnez votre avis
Aucune discussion
Lancez la discussion !
Aucune opinion sur PIONEER
Donner votre opinion sur PIONEER
En cours...