Notice DORO Matra Congress 100

« zawieszenia 8 Przycisk i kontrolka zestawu naglownego 9 Przycisk i kontrolka zapisu/ wyciszania 10 Klawisze z cyframi 0-9, *, # 11 Sygnalizator dzwonienia Polski (zobacz strony 16-20)English 4 www.doro.com English www.doro.com 5 Installation Connection 1. Connect the curly cord to the handset and the socket marked HANDSET underneath the telephone. 2. Connect the telephone cord to the socket marked LINE underneath the telephone, and then to the telephone network socket. 3. A click will be heard when the modular plug is correctly in place. 4. Lift the handset and listen for the dial tone. Your telephone is now operational. Hearing Aid compatible This telephone is hearing aid compatible. Select T mode on the hearing aid to enable coupling. Connection of headset The socket underneath the telephone marked HEADSET is used for the connection of a headset. The headset button =is for connecting/disconnecting a telephone call (equivalent to lifting and putting down the handset) when a headset is connected. Please note! DORO original headsets are tested and adapted to DORO Congress 100. Other types and makes of headsets may be used, though the function and sound quality can not be guaranteed. Any damage occurring due to incompatible or non Doro headsets being installed, will not be covered under the telephones guarantee. Connection of additional equipment On the left side of the telephone there is a socket marked TERMINAL. This is used for connecting additional telephone equipment to the same telephone line, e.g. a wireless telephone, modem, etc. Operation Mute button The handset/headset microphone can be muted during a call by pressing the mute button z. Press the mute button again to activate the microphone. The LED next to the button ? ashes when the microphone is muted. Making a call with the headset 1. Press the headset button =. A dialling tone will be heard in the headset and the LED next to the headset button will illuminate. 2. DIAL the NUMBER required. 3. Press the headset button again to terminate the call. Redial button If the number dialled is engaged or if the last number dialled is to be redialled, lift the receiver or press the headset button =. Press the redial button r. On Hold Press the hold button h to place a call on hold. The LED next to the button will illuminate. The call can be resumed by pressing the hold button again or from another telephone connected to the same line. When a call is connected. Press the button h to hold the telephone call. The LED above the button will illuminate. To resume the telephone call, lift any receiver. Recall Press the recall button R followed by the extension number to transfer calls when connected to a PBX. Access to additional network services can be gained by using the recall button R, * and # keys. Contact your network operator for more information.English 6 www.doro.com English www.doro.com 7 Settings Memory This telephone has 10 indirect memories (09). When a number is stored in a memory location, you need to press only two buttons to make the call. Storing numbers 1. Lift the receiver and press store button P (ignore the dialling tone). 2. Press memory button m. 3. Select memory location by pressing one of the number keys 09. 4. Enter the phone number (max 21 digits). 5. Press store button P and replace the receiver. The number is now stored. Calling using memory lo... »